Pintafino SET for 20m2

SET Includes Everything You Need for Completing Approximately 20m² in One Go (Note: Colors Sold Separately, SET Does Not Include Tools)

The substrate must be flat, uniform, hard, dry, solid, with the largest dents patched. Suitable for both indoor and outdoor use.

If applying resin coating over a tiled surface or waterproofing membrane, choose Pintafino BASE for the base layer. For tiled surfaces, consumption depends on the number and depth of joints, approximately 1.5-2kg/m². Tiled surfaces are first leveled with Pintafino Base resin coating. If unsure, please ask for advice from customer service. Pintafino MEDIUM finishes the surface smoothly. Remember to also add Pintafino Installation and Maintenance Instructions to your cart. Suitable for both indoor and outdoor use. It does not withstand immersion, so ensure sufficient slopes on flat surfaces. The product must not freeze during storage.

1. Pintafino PRIMER is a sealer that can be diluted up to 40% with water. This set includes one liter of PRIMER primer, but if the base is highly absorbent (e.g., an old concrete floor), we recommend adding an extra primer to your cart. Consumption is approximately 1L/8-10m² undiluted and 20-25m² diluted, depending on surface absorption.
2. From the Pintafino BASE 20kg container, you can apply one coarse layer over approximately 20m². Therefore, consumption is about 1kg/m². BASE has a grain size of approximately 0.4mm. Drying time is 3-4 hours, depending on conditions.
3. One carefully applied layer of Pintafino MEDIUM coating is sufficient, but you can apply the product twice if necessary. If you want two layers of MEDIUM, purchase an additional 2x5kg containers in addition to the SET. Consumption is about 0.5kg/m². Drying time is approximately 2-3 hours, depending on conditions.

NOTE! Remember to purchase the COLOR for Pintafino separately! You can vary the amount of tinting paste in different layers to achieve color variations in the final surface.

1. Pintafino PRE SEALER is a single-component product and easy to use. You can also tint part of the PRE SEALER varnish if desired, for various finishes from marbling to color washing. Dilute the product by 10% before use. Consumption is approximately 1L/8-10m² per layer. PRE SEALER ensures the final varnish coat is flawless. Remember to sand the surface with fine P100-120 sandpaper before the final varnishing.
2. Pintafino 2-K SEALER is a high-quality, hard-surface varnish, composed of two separate components as its name suggests. The 2-K SEALER can also be diluted by about 10% with water if needed. Consumption is approximately 1L/8m² for a carefully applied single layer. The 2-K SEALER ensures the surface remains easy to clean and provides protection against scratches and wear.

For more information, refer to the product-specific pages.

This set includes:

• 20kg Pintafino BASE resin coating
• 2 x 5kg Pintafino MEDIUM resin coating
• 1L Pintafino PRIMER base coat
• 1L Pintafino PRE SEALER primer varnish
• 2 x 1L Pintafino 2-K SEALER topcoat varnish

Additionally, it is advisable to acquire the following tools:

• Steel trowels, e.g., Anza 20 and 25cm or a steel stucco trowel for applying microcement. For very light surfaces, a plastic trowel can be used for the final layer to avoid dark marks from the metal.
• Roller handle, e.g., Anza 54cm, and 10-15cm lint-free rollers, e.g., rilon or microfiber. Protective plastic, painter's tape, and cloths. Suitable containers and mixing sticks. A drill and paint mixer for tinting.

Remember to check for tips and videos on Instagram @pintafino.shop and TikTok @pintafino.